PSI-CT1541ML-TC Circle Track
PSI Dual Valve Spring Set, 1.510" o.d, email@example.com", .780" Lift
Endurance Springs - Pushrod Applications
|CT 1541 ML TC||Dual...||1.510"||1.085"||0.790"||240 lbs @ 2.030"||625 lbs @ 1.250"||494.0"||0.780"||1.180"|
This series has all the benefits of the 1200’s plus an additional nitriding operation. The nitriding process, which is also done in-house, increases the strength at the surface of the wire and at the same time causes a slight softening of the core material. This trade-off in hardness results in a gain in endurance for the Circle Track and Road Circuit teams who are limited by the onset of fatigue at the wire surface. Since Drag racers are not limited by endurance, the loss of core hardness does not make nitriding suitable for their applications.
Max Life Surface Preparation (ML)
A proprietary, multi-step surface enhancement process that has been proven to increase spring endurance, Max Life processing is available for any level of PSI spring and is very beneficial for those looking for increased endurance while maintaining their existing set-up.
Tip Conditioning (TC)
This is an extra process we get done which is where the end of the spring coil is hand finished to remove the sharp edges which can sometimes break off over time and potentially cause engine damage.
*Photo for Illustration purposes only, actual product may vary