~ ~ ~ ~ ~ Buy Now Pay Later, Flexible Payments Now Available ~ ~ ~ ~ ~

Edelbrock Super Victor Intake Manifold Suit Chev / Holden LS3 4150 Carburettor
Edelbrock Super Victor Intake Manifold Suit Chev / Holden LS3 4150 Carburettor
Edelbrock Super Victor Intake Manifold Suit Chev / Holden LS3 4150 Carburettor

Edelbrock Super Victor Intake Manifold Suit Chev / Holden LS3 4150 Carburettor

$1,044.38
$1,044.38
$1,163.58
Sold out
Tax included. Shipping calculated at checkout.

Super Victor Small-Block Chevy LS3 4150 Carburettor Intake manifold

  

Edelbrock Super Victor LS3 Carbureted Intake Manifold for Small-Block Chevrolet Gen IV Engines with LS3, L92, & L76 Rectangle Port Cylinder Heads. Accepts 4150-Series Carburettor. Non-EGR.
 
SKU: 2826
 

DETAILS

Edelbrock part #2826 Super Victor LS3 carbureted intake manifold is designed for Gen IV LS engines equipped with LS3 cylinder heads. This new Super Victor intake manifold is ideal for anyone building a 700+ hp 4150 series carbureted large displacement racing engine operating between 3,500 - 7,500 rpm. This new Super Victor intake manifold is designed with 24% larger runners than our Victor Jr. #28457 along with a larger 4500 style plenum. The large plenum makes this intake manifold ideal for nitrous and forced induction applications. This intake manifold also features tapered runners for increased flow at high rpm. A carburettor mounted style throttle bracket is recommended.
 

DOCUMENTS & INSTALLATION NOTES

PDF-Installation Instructions
 

SPECS

Manufacturer Edelbrock
Application Application Specific
UPC 00085347028269
Series Victor
Grade Type Performance
Gasket Or Seal Included No
Vehicle Model Chevrolet
Ec Basic Operating Rpm Range 3500-7500 RPM
Installation Notes
  • Uses LS3/L76/LS92 style individual port o-ring seals GM PN19256623; Manifold height: A-7.67", B-7.67"; Carb pad height: 7.67"; Carb height (CH) for this manifold is measured from the valley cover flange to the carb pad.; Carb recommendations: Use appropriate 4150/4500 Series racing carburettor; Port exit; dimensions machine matched: 1.27" x 2.58"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminium.
Colour Satin
Finish Satin
Material Aluminium
Rear Maximum Height 7.670 in
Single Or Dual Plane Type Single