~ ~ ~ ~ ~ Buy Now Pay Later, Flexible Payments Now Available ~ ~ ~ ~ ~

Edelbrock Super Victor 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8
Edelbrock Super Victor 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8
Edelbrock Super Victor 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8
Edelbrock Super Victor 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8

Edelbrock Super Victor 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8

$936.71
$936.71
$1,043.61
Sold out
Tax included. Shipping calculated at checkout.

Super Victor 23 Degree Intake Manifold Small-Block Chevy

Edelbrock Super Victor 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8
 
SKU: 2925
 

DETAILS

Edelbrock part #2925 Super Victor 23-degree intake manifold is designed for heads with a standard port location, the runners match the "flat floor" entry of the latest 23-degree heads. Carb pad height is 5-1/2" (from end seals) and overall, this intake is about one-inch taller than our Victor Jr. intake #2975. Runners have a 2.80 square-inch cross-section.
 

DOCUMENTS & INSTALLATION NOTES

PDF-Installation Instructions
 

SPECS

Manufacturer Edelbrock
Application Application Specific
UPC 00085347029259
Series Victor
Gasket Or Seal Included No
Vehicle Model Chevrolet
Ec Basic Operating Rpm Range 3500-8000 RPM
Installation Notes
  • Recommended intake gasket: Edelbrock #7201; Carb recommendations: Use appropriate standard flange square-bore racing carb.; No provisions for exhaust heated chokes or EGR.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Optimum cylinder head port opening size should be as close as possible to the size of the gasket being used.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminium.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; To ensure maximum performance and a proper seal, Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used.
Finish Satin
Material Aluminium
Rear Maximum Height 5.500 in
Single Or Dual Plane Type Single