Edelbrock Performer RPM E-Boss 302 Intake Manifold for 302 Ford Small Block with Cleveland Heads
Edelbrock Performer RPM E-Boss 302 Intake Manifold for 302 Ford Small Block with Cleveland Heads
  • Load image into Gallery viewer, Edelbrock Performer RPM E-Boss 302 Intake Manifold for 302 Ford Small Block with Cleveland Heads
  • Load image into Gallery viewer, Edelbrock Performer RPM E-Boss 302 Intake Manifold for 302 Ford Small Block with Cleveland Heads

Edelbrock Performer RPM E-Boss 302 Intake Manifold for 302 Ford Small Block with Cleveland Heads

Regular price
$729.95
Sale price
$729.95
Regular price
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

Edelbrock Performer RPM E-Boss 302 intake manifold, you can build a mock Boss engine by using a standard 302 block and Edelbrock Performer RPM Cleveland cylinder heads #61699. For high-performance's street and competition, our dual-plane design makes outstanding power from 1500 to 6500 rpm. The Cleveland port layout and intake bolt hole pattern fit both 2V and 4V heads. Features include 8.2" deck height, Windsor end rails, water neck and distributor clearance plus front and rear water bosses. Match with an Edelbrock Performer or Thunder Series AVS carburettor. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.

part #7129 ED7129

SPECS

Application Application Specific
UPC 00085347071296
Series Performer RPM
Grade Type Performance
Gasket Or Seal Included No
Vehicle Model Ford
Ec Basic Operating Rpm Range 1500-6500 RPM
Installation Notes
  • Recommended intake gasket: Edelbrock #7265; Manifold height: A-4.42", B-5.70"; Carb pad height: 5.06"; Carb recommendations: Edelbrock AVS2 or Performer Series 600-800 cfm.; Port exit dimensions: 1.42" x 2.07"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminium.
Centre Maximum Height 5.060 in
CNC Ported No
Finish Satin
Front Maximum Height 4.420 in
Material Aluminium
Rear Maximum Height 5.700 in
Single Or Dual Plane Type Dual