~ ~ ~ ~ ~ Buy Now Pay Later, Flexible Payments Now Available ~ ~ ~ ~ ~

CHE Precision Rocker Trunnion Upgrade Kit Suit Holden / Chevy LS/LT Engines

CHE Precision Rocker Trunnion Upgrade Kit Suit Holden / Chevy LS/LT Engines

$541.20
$541.20
Sold out
Tax included. Shipping calculated at checkout.

Precision LS/LT Rocker Trunnion Upgrade Kit

The kit includes 16 hardened-steel trunnions, 32 bronze bushings, and 32 retainer clips.

Application: LS1, LS2, LS3, LS6, LS7, LS9, the GEN5 LT1 and LT4 stock rockers

If we show we have sold out online, give our sales team a call on 07 3808 1986 and we can get one in for you fast.

You don’t have to worry about nasty needle bearings escaping into your engine anymore! We have a high performance, high RPM solution! CHE Precision offers an LS/LT Trunnion Kit upgrade designed to improve the life and performance of your engine.

It is compatible with stock and aftermarket rocker bolts and the easy assembly kit requires only snap ring pliers and lube. 

By replacing the stock caged roller bearing assembly with CHE’s uniquely designed kit, the low-mass rotating weight is maintained, while providing superior reliability for high RPM LS race engines. With 35+ years of industry experience, CHE has developed its own proprietary material that has revolutionized the industry by setting a new standard for wear and performance.

The trunnion bushings are made of this proprietary bronze material, with superior oil-grooving technology, and provide substantially more load-bearing strength along with maximum lubrication.

 

CHE PRECISION LS ROCKER ARM TRUNNION KIT INSTRUCTIONS


Items Needed For Installation:

Safety Glasses, Motor Oil or Engine Assembly Lube, Snap Ring Pliers, 9/16” & 7/8” 12 Point Shallow Sockets, Bench Vice or Press such as Arbor, Drill, or Hydraulic.

    1. These rocker arm trunnion conversions are designed for a maximum .650” lift and an engine limit of 8500 RPM.
    2. Read the entire set of instructions before beginning work to verify items and parts needed for the conversion. If at any time you do not understand these instructions or run into problems, please feel free to call us at 805-499-8885.
    3. Clean the rocker assemblies in hot water and detergent, such as Simple Green or dish soap to remove excess oil.
    4. Please be sure to wear your safety glasses at this point to reduce chance of eye injury during disassembly. To disassemble the rocker arm assemblies, start by placing the 7/8” socket on a flat surface with the open end facing up. Next, place the rocker assembly on top of the socket while being careful to align the trunnion over the socket opening. Now take the 9/16” socket, and place the open end on top of the rocker assembly while carefully centering it on the trunnion. Carefully take the rocker assembly and sockets to a press or vice and press the trunnion and bearings out of the rocker arm body.
    5. After you have repeated the process for the remaining 15 rockers, lightly clean the rocker arm surfaces where the bearings were pressed in with scotch-brite or very fine sandpaper. Now re-clean all the rocker arms to remove any remaining contaminants.
    6. Start assembly of the rockers by taking a bushing and dipping it in motor oil or engine assembly lube. Insert the bushing into one end of the rocker arm body and place it on a flat surface with the bushing on the bottom. Next take a trunnion and dip both ends into the motor oil or engine assembly lube and place it through the rocker arm body until it seats into the bushing at the bottom. Next take another bushing and coat it in oil or lube and place it on the end of the trunnion. At this point, you will need to install a snap ring onto the end of the trunnion with the sharp edge of the I.D. facing away from the bushing. Flip the rocker assembly over while being careful to not let the bushing on the bottom fall out and install the second snap ring with the same orientation. Make sure the trunnion rotates freely in the rocker assembly and set it aside for now.
    7. Repeat the process for the remaining 15 rocker arm assemblies.
    8. Install the rocker arm assemblies on your engine and torque bolts to manufacturer specifications and enjoy!
trunnion kit

 

Back to LS / LT Engine Parts