Edelbrock Performer Intake Manifold for Holden V8 253-308 CID Engines
Edelbrock Performer Intake Manifold for Holden V8 253-308 CID Engines
Edelbrock Performer Intake Manifold for Holden V8 253-308 CID Engines
Edelbrock Performer Intake Manifold for Holden V8 253-308 CID Engines
Edelbrock Performer Intake Manifold for Holden V8 253-308 CID Engines
Edelbrock Performer Intake Manifold for Holden V8 253-308 CID Engines

Edelbrock Performer Intake Manifold for Holden V8 253-308 CID Engines

Regular price
$595.00
Sale price
$595.00
Regular price
$676.50
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

Edelbrock Performer intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines. This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm. The Performer Holden manifold has been designed to fit both cylinder head bolt hole patterns. Pilot holes have been drilled on each side of the exhaust crossover for early or late model cylinder heads and will need to be drilled out depending on application. Will not fit EFI Heads (see #7594). Accepts both square-bore and spread-bore carbs. Fits Red/Blue/Black engines. Does not have a provision for external heat crossover. Includes Edelbrock square-bore carb adaptor plate #2732, carb gasket and carb studs.

Part # ED2194 2194

SPECS

Application Application Specific
UPC 00085347021949
Series Performer
Grade Type Performance
Gasket Or Seal Included No
Vehicle Model Holden
Ec Basic Operating Rpm Range Idle-5500 RPM
Installation Notes
  • Recommended intake gasket HA265; Do not use high performance or competition type intake gaskets for street application. Due to material deterioration under street driving conditions, internal leakage of both vacuum and oil may occur. Manifold height: A-3.25", B-4.67"; Carb pad height: 3.96"; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 600-750 cfm.; Port exit dimensions: 1.07" x 1.83"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminium.
Centre Maximum Height 3.960 in
CNC Ported No
Finish Satin
Front Maximum Height 3.250 in
Material Aluminium
Rear Maximum Height 4.670 in
Single Or Dual Plane Type Dual