Need to clear the cross-frame or tighter fit on the sides for swapping an LS engine into your Hot Rod? The Team at Chevrolet Performance looked thru the offering of factory pans for one of their project cars and choose the oil pan from the Hummer H3 that was equipped with the LS engine. Tight fit on the sides, short length sump area to clear most cross-frames, and approximately 7.75" depth on the sump will work for most applications. Sump
19212593 Chevrolet Performance
Comes with all the necessary components to install this LS Oil Pan on your engine.
- Oil Pan and Oil Pan Gasket
- Oil Pan Bolts
- Windage Tray
- Dip Stick and Tube
Applications
- Most 1955-1995 GM Rear Wheel Drive cars and trucks
- Bolts to all GM Gen III & IV LS family engines including LS1, LS6, LS2, LS3, LS7, LS9, L76, L98, L92, L93, L99, LQ4, LQ9, LSA, LSX
DESCRIPTION
Tech Notes
- Pan Capacity is 5.5-quarts
- Windage Tray will need spacers for Stroker Crankshafts! Check for clearance if you are using aftermarket connecting rods and/or a stroker crankshaft
- Pan Depth is approximately 7.75"
- Filter thread M22 x 1.5
- Rear sump
Kit Component List
| Description | Part Number | QTY |
| Oil Pan | 12640745 | 1 |
| Bolts Short - M8X1.25X30MM | 11515758 | 13 |
| Bolts Long - M6X1.0X136MM | 12554990 | 2 |
| Oil Pan Gasket | 12612350 | 1 |
| Windage Tray | 12611129 | 1 |
| W/Tray Lock Nuts - M8X1.25 | 11515742 | 10 |
| Oil Pump Pick-Up Tube | 12608593 | 1 |
| Pick-Up Tube to Pump O-Ring | 12584922 | 1 |
| Pick-Up Tube Bolt | 11516521 | 1 |
| Dip Stick | 12603506 | 1 |
| Dip Stick Tube | 12584738 | 1 |
| Bolt for Tube - M10X1.5X20MM | 11588736 | 1 |