ATI Super Damper Harmonic Balancer Suit SB Ford, 6.325", 3 Ring, Tab C, 3 Bolt

Regular price: $962.50
Sale price: $962.50
Regular price
Unit price: per

Tax included. Shipping calculated at checkout.

Quantity

Quantity must be 1 or more

ATI Super Damper Harmonic Balancer Suit SB Ford

Part # 917660

• 6.325" Diameter

• Ford OEM Front - 3 Bolt Pulley

• 3 Ring

• Internal Balance

• Aluminium Outer Shell

• SFI 18.1 Approved

• 3" C TIMING TAB [1] [10]

[1] These dampers have a 2.280 female pulley locating diameter

[10] This hub is bored straight through with no lead area and will not press fit onto OEM crankshafts with the keyway 1” back. It is intended for
aftermarket cranks or “engine builder hone to fit” full length
keys. Request counterbore if using an OEM crankshaft.

* photo for illustration purposes only

Ford Super Dampers

The patented ATI Super Damper is the only damper designed exclusively for high performance Ford engines.

Eliminates torsional crankshaft vibrations
Exceeds SFI 18.1 specs
Black zinc chromate finished
Tunable, rebuildable, and extremely efficient at ALL RPM
Laser engraved 360° timing marks

Inner and outer shells are available in aluminium or steel, and contain a steel inertia weight. This inertia weight has six (2-ring design) or eight (3-ring design) computer machined grooves to retain the proper durometer O-rings (dyno tested for each application).

How to find the correct Ford Small Block Damper

To choose the correct SBF Damper, you need to know the location of the timing tab, the bolt style of the pulley and the overall damper length - the distance measured from the front face of the damper to the back of the hub.

1. Timing Tab Location
Ford dampers come with one of three timing covers with the following tab locations:

ATI Ford Timing Marks

Small block engines with timing "Tab A” (driver side timing) would most likely be 260 (all), 289 (all), 302-(‘67-’69) and Boss 302 (‘69-’70).

2. Pulley Bolt Style
Ford pulleys come in two bolt styles - either 3-bolt or 4-bolt fronts. 3-bolt pulleys are found on dampers with a length of 3", 4-bolt pulleys are used on 4" dampers, and 3.35" (~3-3/8") dampers use both 3 and 4 bolt fronts. On ATIs damper charts, 3-bolt dampers are highlighted in Yellow and 4-bolt dampers are highlighted in Orange.

3. Damper Length
Ford dampers come in three lengths—the distance measured from the front face of the damper to the back of the hub. They are approximately 3”, 3.35" (~3-3/8") or 4”.

ATI Ford Damper Length

1982 and later 302 HO, 34 oz. in. use Damper #918910.
External balance units are 28.2 oz.in. 302-351, except 302 HO part #918910 which is 50.oz.
Part #918911 (28 oz. in.): If you install a 351 external balance crank in a 302 HO and use the stock 302 HO timing cover.
The 28.2 oz. in. units will work on all external balance engines EXCEPT the 1982 and later HO provided the timing tab is in the proper place or you can fabricate a pointer. The length is okay if you’re using pulleys.