Frequently Asked Questions
All WELD Racing wheels are made in Kansas City, Missouri, USA
.
On the 15×3.5 “anglia” and “strange” application wheels, yes. Contrary to previous multi-piece spindle mount models, this is not evident from the front of the current one-piece wheel models. Studs, washers, and jet nuts are provided in each wheel box to attach the rotor to the wheel. The 17×2.25 spindle mount wheel can not accommodate brakes.
.
The AlumaStar 2.0, AlumaStar PRO, Magnum 2.0, Magnum PRO, V-Series, WELDStar RT, Magnum III RT, Vektor RT, Vitesse RT, Classic RT, Woodward RT, and the 15“ S71 have lug holes drilled to accept a 5/8” drive stud. The lug hole opening is drilled to .703”. The Draglite, ProStar, and Rodlite have a lug hole opening of .687“ which will not allow the use of a 5/8” stud without altering the size of the lug holes. This will affect the warranty. None of the 17“ or 18” RT-S series products will accept a 5/8” drive stud.
.
.
.
.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
