SUPER POWER FLOW REPLACEMENT ELEMENTS
Size: 150mm # 70001-AK021 & 200mm # 70001-AK022
Dry, 3 layer type
Colour: Green
Filter of Super Power Flow collects dust and intake efficiency will decrease after long time usage. In order to keep dust collection and engine performance, filter should be periodically replaced.
How to change the SUPER POWER FLOW Filter(4 steps)
-
1. Take the filter out of the frame.
Release the frame bolt first and take out the filter from the frame.
-
2. Change the filter.
First take the used filter out. Then put the new filter into the frame as shown on the photo by pushing it hard and set it for the center hole.
-
3. Be careful not to make a gap.
Set the filter tight to the frame. Do not try it a once but put it by step by step carefully. Try not to make any wrinkle.
-
4. Finally set the bolt.
Put the filter in the frame tightly and set the bolt firmly. Make sure again there is no gap between the filter and the frame.
* Approximate change period:
Dry type: after 6 to 12 months, or drive 6,000km to 10,000km
Wet type: after 3 to 6 months, or drive 3,000km to 5,000km
70001-AK021 70001-AK022